
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X10-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X10-10B is a compact double-acting double-rod cylinder built around a short riveted body that minimizes axial mounting depth where space is tight. An external M5x0.8 adjuster screw lets you dial the extend stop down from 10 mm to 0 mm directly on the machine, eliminating the need for shims or part swaps during commissioning. This SKU features a male M5x0.8 piston rod thread.
End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Because this configuration lacks the -S magnet option, it cannot accept reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X10-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 10 mm to set a precise 100.5 N probe contact depth on the machine without machining custom spacers.
Fine-tune the male M5 rod extension in tight electronics assemblies where the short riveted body saves critical axial depth.
Adjust the mechanical stop on the fly for trial positioning; the fixed NBR bumper safely decelerates the 5.1 kg vertical test load.
Choose this specific unit when your fixture requires on-site extend tuning between 0 and 10 mm.
Confirm the 16 mm bore, 10 mm stroke, 10 mm window, and M5x0.8 air port suit your pneumatic layout. This SKU includes the -B male M5x0.8 rod thread. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw shortens the extend stop by up to 10 mm, giving a usable extend range of 0-10 mm. It is a mechanical stop, not a mid-stroke lock. The cylinder cannot hold a load on air loss and requires an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.