verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke15 mm
  • Adjustable range5–15 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$25.35 $32.85Save 22% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10

The AirTAC SDAJ16X15-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M5x0.8) screw lets you dial the extend position on the machine anywhere between 5 and 15 mm, eliminating the need for shims or part swaps during commissioning. Retract remains at the full stroke length.

This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, meaning there is no adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke15 mm
Adjustable range5 – 15 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×15Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10 Is Used

precision_manufacturing

Probe Head Dial-In

Perfect for test fixtures needing exact probe contact depth, letting operators fine-tune the 5-15 mm extend stop without disassembling the tool.

straighten

Light Forming Stops

Ideal for thin-metal bending guides, providing on-machine adjustability for the bend depth while relying on the fixed NBR bumper for end deceleration.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10 the Right Cylinder?

When sizing this 16 mm bore actuator, evaluate your force needs both ways. Dropping down to an SDAJ12 reduces the 0.5 MPa push to 56.5 N, whereas stepping up to an SDAJ20 increases it to 157.1 N.

This specific SKU lacks the -S magnet, so it cannot accept AirTAC reed or electronic switches for position feedback; choose the -S variant if sensing is required. Remember that the fixed NBR bumper only decelerates the stroke end and the R screw is a mechanical stop, not a lock. If your application must hold a load vertically during air loss or valve centering, add an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–15 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10 FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

The M5x0.8 R screw mechanically shortens the extend end position from the 15 mm maximum down to 5 mm. It acts purely as a physical stop and does not alter the pneumatic force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X15-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.