
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X15-10B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 5 to 15 mm directly on your machine. The short riveted body drastically reduces axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male-thread M5x0.8 piston rod for secure external mounting and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration relies strictly on a fixed NBR bumper, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 5 to 15 mm extend stop to set exact electrical probe contact depth on small test fixtures without machining new spacers.
Adjust the mechanical stop on the fly for delicate clamping tasks where a fixed 15 mm stroke would crush the workpiece.
Choose this male-rod (M5x0.8), non-magnet model for purely mechanical setups requiring on-site stroke tuning.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 15 mm maximum stroke, 10 mm adjust window, M5x0.8 port, and male rod thread before ordering.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw shortens the extend stop by up to 10 mm, giving a usable extend range of 5 to 15 mm. It is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss and requires an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.