
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10SB is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X15-10SB is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 5 to 15 mm directly on your machine. The short riveted body drastically saves axial mounting depth where larger profile or round-body units cannot fit.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M5x0.8 piston rod thread (-B) instead of the default female M3x0.5. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 5 and 15 mm to find the exact contact point for delicate probe tips during initial jig commissioning.
Rotate the M5x0.8 adjuster to shift the rod end instantly for different product widths on a packaging line without swapping hardware.
Choose this model when setups demand frequent on-machine stroke tuning without part swaps.
Confirm the 15 mm maximum stroke, 10 mm adjust window, and M5x0.8 air port suit your envelope. The -S magnet enables position sensing, and the -B option supplies a male M5x0.8 rod end. Remember that a plain cylinder does not hold a load on air loss or valve centring; the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a pressure range of 0.15 to 1.0 MPa.
The external M5x0.8 screw shortens the extend stroke by up to 10 mm, allowing an adjustable end position from 5 to 15 mm without changing parts; retract remains full. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.