
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-20S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X15-20S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop down to any position between 0 and 15 mm. The short riveted body drastically cuts axial mounting depth where round-body alternatives will not fit.
A fixed NBR bumper handles end-of-stroke deceleration, as there is no adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X15-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 15 mm |
| Adjustable range | 0 – 15 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 15 mm to set exact clamping depth on delicate electronic housings without machining custom spacers.
Rotate the M5x0.8 adjuster to shift the rod end position instantly when switching a packaging line between different product tray widths.
Leverage the 5.1 kg vertical lift margin and compact riveted body to trial multiple drop heights in tight automated test fixtures.
This model suits mechanisms needing on-site stroke tuning during setup-heavy changeovers.
Verify your parameters: 16 mm bore, 15 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, female M3x0.5 rod-end thread, and the integrated magnet. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the adjuster acts as a mechanical stop, not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The included -S magnet allows tracking by AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.