verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke20 mm
  • Adjustable range10–20 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$26.27 $33.77Save 22% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10

The AirTAC SDAJ16X20-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke down from the 20mm maximum to a 10mm minimum directly on the machine, avoiding part swaps or shims during fine-tuning.

This thin riveted-body design drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke20 mm
Adjustable range10 – 20 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×20Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10 Is Used

conveyor_belt

Small Part Diverter

Adjust the stop between 10 and 20mm on the fly to deflect varying package widths without changing hardware, fitting easily into tight conveyor side frames.

view_module

Clamp Depth Setup

Fine-tune the outward clamping reach during machine changeover, relying on the fixed NBR bumper to absorb the 86.4N pull impact at 0.5MPa.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10 the Right Cylinder?

Choose this unit if your fixture requires on-site stroke tuning between 10 and 20mm.

Confirm your parameters: 16mm bore, 20mm max stroke, 10mm adjust window, M5x0.8 port, female M3x0.5 rod thread, and no magnet. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered—the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–20 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10 FAQ

The theoretical maximum push force is 21kgf at 1.0MPa.

The external M5x0.8 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 20mm maximum down to 10mm. It does not alter the output force, and it is not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X20-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.