
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-20 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X20-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position from 0 to 20 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. The short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit.
End shock is managed solely by a fixed NBR bumper which decelerates the stroke end; it is not an adjustable air cushion. This SKU ships without a piston magnet and cannot take a magnetic switch.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on-site to deflect small packages on a conveyor line, tuning the stop position during initial commissioning without changing parts.
Set precise clamping depth in tight lab enclosures where the short riveted body saves axial space and the fixed NBR bumper absorbs end shock.
Choose this model if your fixture requires on-site stroke tuning between 0 and 20 mm. Confirm your specs: 16 mm bore, 20 mm stroke, 20 mm window, M5x0.8 port, female rod thread, and no magnet. Note that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
It operates at 30-500 mm/s, handles pressures from 0.15 to 1.0 MPa, and functions in temperatures from -20 to +70 C.
The R (M5x0.8) screw mechanically shortens the extend stop from 0 to 20 mm without changing the force output. This screw is a stop, not a mid-stroke lock; the cylinder cannot hold a load if air is lost. Additionally, this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.