
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X20-20B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 0 to 20 mm directly on your machine.
The short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. This specific SKU includes a male M5x0.8 piston rod thread (the -B option) instead of the default female thread. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X20-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 20 mm to find the exact contact point on prototype tooling without fabricating new spacers.
Fine-tune the male M5 rod extension up to 20 mm to apply precise contact pressure against delicate test samples.
When sizing this 16 mm bore, verify your force requirements against its neighbors. Dropping down to an SDAJ12 reduces the 0.5 MPa push to 56.5 N, whereas stepping up to an SDAJ20 increases it to 157.1 N.
This model suits operators needing on-site stroke tuning during frequent changeovers. Confirm your parameters: 16 mm bore, 20 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, male M5x0.8 rod thread, and no piston magnet. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end and does not lock the load. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw mechanically shortens the extend position up to 20 mm without changing the force. This SKU lacks a piston magnet, so it cannot take sensors. The screw is a stop, not a lock; the cylinder will drift on air loss, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.