verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke25 mm
  • Adjustable range15–25 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$31.60 $39.10Save 19% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S

The AirTAC SDAJ16X25-10S is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external M5x0.8 adjuster screw, you set the outward stroke anywhere between 15 and 25 mm, eliminating the need for shims or part swaps during fine-tuning.

This thin riveted-body actuator saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches for precise position sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke25 mm
Adjustable range15 – 25 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×25Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S Is Used

precision_manufacturing

Probe Positioning

Dial in the extend distance between 15 and 25 mm on the fly to test electronic contacts without fabricating custom spacers.

science

Lab Dispense Heads

Adjust the mechanical stop to calibrate fluid deposit depth precisely, using the compact body to fit tight benchtop enclosures.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S the Right Cylinder?

When sizing this 16 mm bore actuator, evaluate your force requirements bidirectionally.

Select this specific configuration if your machine commissioning requires trial positioning or frequent changeovers. Confirm the 25 mm maximum stroke, 10 mm adjustment window, M5x0.8 port, female M3x0.5 rod thread, and the integrated -S magnet. Remember that the fixed bumper and mechanical stop do not secure the load; if air pressure drops, the piston drifts. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–25 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

The M5x0.8 R screw shortens the extend stop by up to 10 mm, yielding a usable 15 to 25 mm outward range. The integrated -S magnet works with AirTAC reed or electronic switches to confirm end-of-stroke position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X25-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X25-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.