verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke30 mm
  • Adjustable range20–30 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$28.14 $35.64Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B

The AirTAC SDAJ16X30-10B is a compact double-acting double-rod cylinder built for tight spaces. Its short riveted body saves axial mounting depth where larger profile or round-body units will not fit. An external M5x0.8 R-screw lets you dial the extend stop on the machine, shortening the forward stroke anywhere from 20 to 30 mm without swapping shims or parts.

This SKU features a male M5x0.8 piston rod thread for direct mounting. End shock is handled by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion. Because this specific model lacks the -S magnet option, it cannot accept reed or electronic switches. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke30 mm
Adjustable range20 – 30 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×30Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B Is Used

precision_manufacturing

Probe Contact Tuning

Dial the extend stop from 20 to 30 mm to set exact electrical probe contact depth on test fixtures without machining new spacers.

view_module

Clamp Positioning

Fine-tune the forward clamping position during assembly changeovers, relying on the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B the Right Cylinder?

Choose this specific unit when your fixture requires on-site stroke tuning between 20 and 30 mm, and confirm your requirements for the M5x0.8 port, male M5x0.8 rod, and the 10 mm adjust window. Keep in mind a plain cylinder does not hold a load if air pressure drops or the valve is centred; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B FAQ

Turning the external M5x0.8 R-screw mechanically shortens the extend stop, allowing you to set the forward stroke anywhere between 20 and 30 mm. The screw only sets the stop position; it does not alter the force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X30-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.