
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X30-10S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 20 to 30 mm directly on the machine, removing the need for shims or part swaps during changeovers.
Its short riveted body drastically cuts axial mounting depth where round-body or larger profile units will not fit. The piston carries a built-in magnet for AirTAC reed or electronic switches, while a fixed NBR bumper handles end-of-stroke deceleration without acting as a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 30 mm to set a precise contact depth for electronic testing probes without machining new spacers.
Set exact fluid deposit heights by turning the M5x0.8 screw, ensuring the nozzle clears delicate glassware before retracting.
Stepping down to the SDAJ12 yields 56.5 N, whereas moving up to the SDAJ20 provides 157.1 N. Choose this specific unit if your fixture requires on-site stroke tuning between 20 and 30 mm.
Confirm your parameters: 16 mm bore, 30 mm maximum stroke, 10 mm adjust window, M5x0.8 port, built-in S magnet, and female M3x0.5 rod-end thread. Note that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 adjuster screw shortens the extend stop by up to 10 mm, yielding a usable 20 to 30 mm range. The included S magnet enables position sensing with AirTAC reed or electronic switches. The screw sets the stop only; it does not alter force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.