verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke30 mm
  • Adjustable range10–30 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$28.14 $35.64Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B

The AirTAC SDAJ16X30-20B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 10 mm up to 30 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

This variant features a male M5x0.8 piston rod thread and a short riveted body that conserves axial mounting depth in tight fixtures. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the piston rather than acting as an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S version.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke30 mm
Adjustable range10 – 30 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×30Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B Is Used

precision_manufacturing

Probe Positioning

Dial the extend stop between 10 and 30 mm to precisely set a testing probe's contact depth without disassembling the fixture.

swap_horiz

Format Changeovers

Quickly adapt a clamping jaw on a packaging line by turning the M5x0.8 adjuster to match varying product widths on the fly.

science

Lab Automation

Leverage the compact riveted body to fit tight lab enclosures while using the male M5 rod to push a sample tray to a tuned endpoint.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B the Right Cylinder?

Choose this male-rod (-B) model if your tooling requires an externally threaded M5x0.8 attachment point.

On-machine stroke tuning is essential for trial positioning or frequent format changes. Keep in mind that a standard SDAJ will not hold a load if air pressure drops or the valve centres; the piston drifts, and the fixed bumper only decelerates near the end of travel. For load-holding security without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the 30 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, and the absence of a magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B FAQ

The theoretical maximum push force is 21 kgf at 1.0 MPa.

The external M5x0.8 screw acts as a mechanical stop to shorten the extend stroke by up to 20 mm, allowing the outward position to be set anywhere from 10 to 30 mm. It does not alter the output force, and retract remains a full stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X30-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.