verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke30 mm
  • Adjustable range0–30 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$28.14 $35.64Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30

The AirTAC SDAJ16X30-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M5x0.8 adjuster screw, you can dial the outward stroke down from its 30 mm maximum to zero directly on the machine, eliminating the need for shims or part swaps during changeovers. This on-site tunability makes it highly effective for trial positioning and frequent setup changes.

The short riveted body minimizes axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke30 mm
Adjustable range0 – 30 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×30Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30 Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the exact 0-30 mm extend stop during initial commissioning of machining jigs without machining new spacers.

science

Lab Test Fixtures

Fine-tune the engagement distance of a 5.1 kg vertical test load safely within a compact riveted body footprint.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30 the Right Cylinder?

This 16 mm bore is ideal when the smaller unit lacks thrust but the 20 mm variant exceeds your spatial limits.

Choose this specific SKU if your fixture requires on-site stroke tuning between 0 and 30 mm. Confirm your porting matches the M5x0.8 air connection and that the female M3x0.5 rod-end thread suits your linkage. Note that this base configuration lacks a piston magnet, so it cannot accept reed or electronic switches; select the -S variant if sensing is required. Furthermore, a plain cylinder does not hold a load on air loss or valve centring—deploy an external rod lock or pilot-operated check valve for secure holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30 FAQ

The M5x0.8 R screw mechanically shortens the extend stop from 30 mm down to 0 mm without changing the force. This specific SKU has no magnet; you must append the -S option to the model code to use reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X30-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.