verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke30 mm
  • Adjustable range0–30 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.53 $40.03Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S

The AirTAC SDAJ16X30-30S is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the M5x0.8 adjuster screw lets you dial the forward stroke down from 30 mm to 0 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. The short riveted body significantly reduces axial mounting depth where round-body alternatives will not fit.

This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches. End-of-travel shock is managed solely by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke30 mm
Adjustable range0 – 30 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×30Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S Is Used

precision_manufacturing

Format Changeover Jigs

Dial the extend stop from 0 to 30 mm on the fly to accommodate varying product widths without machining custom spacers.

science

Trial Positioning Rigs

Sweep the M5x0.8 adjuster to find the exact 60 N contact force required for delicate sensor calibration before locking the collar.

packaging

Light Carton Flap Folding

Tune the extend endpoint precisely to fold varying cardboard thicknesses, relying on the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S the Right Cylinder?

Choose this 30 mm window variant if your fixture requires frequent trial positioning or rapid format changes.

Confirm your parameters: 16 mm bore, 30 mm maximum stroke, 30 mm adjustability, M5x0.8 port, female M3x0.5 rod thread, and the -S magnet option. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S FAQ

The theoretical maximum is 21 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.

The external R (M5x0.8) screw shortens the extend endpoint by up to 30 mm, giving a usable forward range of 0 to 30 mm while retract remains full. The -S code denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X30-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.