
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X35-10 is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 25 and 35 mm directly on the machine.
Its short riveted body drastically cuts axial mounting depth where round-body alternatives will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M5x0.8 screw to set a precise 28 mm extend stop, ensuring delicate electrical probes contact PCB pads without overshooting.
Adjust the forward position on the fly for varying box heights, using the 25-35 mm window to perfectly tuck flaps before taping.
When sizing this 16 mm bore, evaluate your force requirements bidirectionally. Choose this unit if your fixture requires frequent on-site stroke tuning between 25 and 35 mm.
Confirm the 16 mm bore, 35 mm maximum stroke, 10 mm adjust window, and M5x0.8 port match your pneumatic layout. This configuration has a female M3x0.5 rod-end thread and no magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts. For suspended loads, install an external rod lock or pilot-operated check valve, as the fixed bumper only decelerates near the end of travel.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
Turning the external M5x0.8 screw shortens the extend stroke by up to 10 mm, allowing you to set the forward stop anywhere from 25 to 35 mm. The screw acts only as a mechanical stop and does not alter the output force. It cannot hold a load mid-stroke or upon air loss; you need an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.