verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke35 mm
  • Adjustable range15–35 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$29.06 $36.56Save 20% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B

The AirTAC SDAJ16X35-20B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 15 and 35 mm directly at the machine, eliminating shims or part swaps during changeovers.

The short riveted body drastically reduces axial mounting depth where round-body or profile variants will not fit. This specific SKU includes a male M5x0.8 piston rod end (instead of the default female M3x0.5) and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-stroke deceleration relies strictly on a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke35 mm
Adjustable range15 – 35 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×35Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B Is Used

straighten

Adjustable Push Probes

Dial the extend stop from 15 to 35 mm to test sensor contact points on small electronic assemblies without machining new spacers.

precision_manufacturing

Short-Stroke Clamping

Fits into tight riveted-body footprints to clamp delicate workpieces, using the male M5x0.8 rod to secure custom tooling precisely.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B the Right Cylinder?

When sizing this 16 mm bore, evaluate your force needs bidirectionally.

Choose this configuration if your fixture requires on-site extend tuning between 15 and 35 mm. Confirm your setup needs the male M5x0.8 rod thread, the M5x0.8 air port, and the 20 mm adjustment window. Remember that a plain cylinder drifts when air is lost or the valve centers—the fixed NBR bumper only decelerates the stroke end and acts as a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

Turning the R (M5x0.8) screw shortens the extend stroke by up to 20 mm, setting the stop anywhere between 15 and 35 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder will drift if air pressure is lost, so use an external rod lock for load holding. This SKU lacks the -S magnet and cannot take sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X35-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.