
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X35-20S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that lets you dial the extend stop anywhere between 15 and 35 mm directly on the machine. The short riveted body drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock without the complexity of an adjustable air cushion. The 6 mm piston rod utilizes an M3x0.5 female thread, and the body accepts standard AirTAC compact-cylinder accessories.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 15-35 mm extend stop to tune the ejection probe depth precisely for varying plastic mold geometries without swapping actuators.
Leverage the compact riveted body to fit tight test fixtures, using the magnet and electronic switches to confirm the exact trial position of a 5 kg sample.
Choose this specific model if your fixture requires frequent on-machine stroke tuning across a 15 to 35 mm window without part swaps.
Confirm the 35 mm maximum stroke, 20 mm adjustability window, M5x0.8 port, and the integrated magnet for switch tracking. Remember that a plain compact cylinder does not hold position if air pressure drops or the valve is centered—the piston will drift. For suspended or vertical loads that must remain fixed during air loss, incorporate an external rod lock or a pilot-operated check valve, as the fixed NBR bumper only decelerates near the end of travel and acts purely as a mechanical stop.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The external M5x0.8 R screw shortens the extend stroke by up to 20 mm, allowing you to set the end position anywhere from 15 to 35 mm. The retract stroke remains full length. The built-in -S magnet allows you to mount AirTAC reed or electronic switches directly into the body grooves for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.