
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward stroke down by 10 mm, providing a usable range of 30 to 40 mm directly at the machine without changing shims or parts.
This variant features a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body drastically cuts axial mounting depth where larger profile or round-body units fail to fit. End-of-travel shock is handled strictly by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M5x0.8 adjuster to set a precise 35 mm probe extension during initial machine commissioning, protecting delicate testing tips.
Tune the extend stop between 30 and 40 mm to push lightweight plastic components out of a tight fixture without bending the male rod.
Use the compact riveted body to fit into a narrow forming gate, making quick changeovers for different material thicknesses via the external screw.
When sizing this unit, evaluate both neighboring bores against your real load requirements. Choose this specific 40 mm stroke unit with the 10 mm window when your assembly requires on-site trial positioning to find the exact endpoint.
Confirm your parameters before ordering: 16 mm bore, 40 mm maximum stroke, 10 mm adjustability window, and an M5x0.8 air port. This SKU includes the -B option for a male-threaded rod end and has no -S magnet for sensing. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 21 kgf at 1.0 MPa. The adjustable stop does not alter these force values.
Turning the external R (M5x0.8) screw mechanically shortens the forward end position by up to 10 mm, giving an extend range of 30 to 40 mm. The retract stroke remains full. This screw is a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.