
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-20B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 20 to 40 mm directly on your machine. The short riveted body drastically saves axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male-thread M5x0.8 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 20 to 40 mm extend stop during prototype runs. The external R screw allows iterative positioning tweaks without disassembling the fixture.
Fine-tune the pusher stroke on-site to accommodate varying product widths.
Fit the short riveted body into dense packaging machinery. The fixed NBR bumper reliably absorbs the shock of repeated high-speed ejection cycles.
Choose this male-rod (B) configuration if your tooling requires an externally threaded M5x0.8 attachment point.
This model excels in setup-heavy lines requiring frequent on-machine stroke tuning without part changes. Note that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the stroke end, never acting as a lock. For suspended or gravity-loaded applications, integrate an external rod lock or pilot-operated check valve. Confirm your required 20-40 mm adjust window, M5x0.8 port, and lack of magnet before ordering.
Quick checklist
The theoretical maximum push force is 21 kgf at 1.0 MPa. Adjusting the external stop screw does not alter these force values.
Turning the M5x0.8 adjuster screw shortens the extend stroke by up to 20 mm, allowing the rod to stop anywhere between 20 mm and the maximum 40 mm. Retract remains full stroke, and the screw functions purely as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.