
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-20S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke down by 20 mm on the machine, yielding a usable extend range of 20 to 40 mm without changing parts.
This 16 mm bore unit saves valuable axial mounting depth where larger profile bodies will not fit. It carries a built-in piston magnet (-S) for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. The adjuster is a mechanical end-stop, not a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 mm down to 20 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Safely test multiple extend endpoints during R&D trials by turning the M5x0.8 screw, finding the exact 20-40 mm travel needed.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 20 and 40 mm. Confirm your setup needs the M5x0.8 port, the female M3x0.5 rod-end thread, and the -S magnet for sensing. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw mechanically shortens the extend endpoint by up to 20 mm, giving a 20 to 40 mm range, but it does not alter force or lock mid-stroke. The built-in -S magnet allows tracking via AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.