verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke45 mm
  • Adjustable range35–45 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$30.93 $38.43Save 19% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10

The AirTAC SDAJ16X45-10 is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 35 to 45 mm.

Its short riveted body minimizes axial footprint where larger profile or round-body units cannot fit. End shock is managed solely by a fixed NBR bumper, so for high-energy cycles consider slowing the approach or adding external shock absorption.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke45 mm
Adjustable range35 – 45 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×45Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10 Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the exact 35-45 mm extend stop during initial fixture setup, perfect for finding the optimal contact point before finalizing a rigid stop.

swap_horiz

Quick Changeover Lines

Adapt actuator reach on the fly for slightly different part heights without disassembling the cylinder or adding shims to the tooling.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10 the Right Cylinder?

Choose this model when trial positioning or frequent changeover requires on-site stroke tuning without swapping parts.

Confirm your requirements for the 45 mm maximum stroke, 10 mm window, M5x0.8 port, and female M3x0.5 rod thread. Note this SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Remember that the mechanical stop and fixed bumper do not hold the load on air loss—install an external rod lock or pilot-operated check valve for holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10 FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

Turning the R (M5x0.8) screw mechanically shortens the extend end position from the 45 mm maximum down to 35 mm. This sets the physical stop and does not alter the cylinder's pneumatic force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X45-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.