
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X45-10B is a compact double-acting double-rod cylinder featuring a 10mm adjustable extend window. An external M5x0.8 adjuster screw lets you dial the forward stop from 35 to 45mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This variant features a male M5x0.8 piston rod thread and a short riveted body that saves valuable axial mounting depth where larger profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M5 adjuster to set the exact 35-45mm extend distance for electronic test probes, ensuring delicate contact without crushing components.
Fit the short riveted body into tight assembly fixtures and use the male M5 rod to secure delicate workpieces with a safe 60N holding load.
Choose this male-rod (-B) model when your tooling requires an M5x0.8 threaded end.
The on-site stroke tuning is ideal for trial positioning and setup-heavy lines. Remember that a plain SDAJ does not hold position if air pressure drops or the valve is centered—the piston drifts, as the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your requirements for the 45mm stroke, 10mm window, M5x0.8 port, and male rod thread before ordering.
Quick checklist
At 0.7MPa, push increases to 140.7N. The theoretical maximum push is 21kgf at 1.0MPa.
The M5x0.8 R screw mechanically shortens the extend stop from the 45mm maximum down to 35mm without changing the force. This specific SKU has no magnet (-S omitted), so it cannot accept reed or electronic switches; order the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.