
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X45-10S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 35 and 45 mm without swapping shims or parts, while the retract remains full length.
The short riveted body drastically cuts axial mounting depth where round-body alternatives will not fit. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. This specific unit includes a built-in piston magnet for AirTAC reed or electronic switches, and operates at 30-500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 45 mm to precisely set a testing probe contact depth without machining new spacers.
Adjust the mechanical stop to control fluid deposit height accurately, relying on the fixed NBR bumper for end deceleration.
Choose this model when your fixture requires exact on-site stroke tuning across a 35-45 mm window.
Confirm the 16 mm bore, 45 mm maximum stroke, 10 mm adjustment window, M5x0.8 air port, and the -S magnet option. Remember that a plain cylinder does not hold a load if air pressure drops or the valve is centred; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw shortens the extend end position from the 45 mm maximum down to 35 mm. The -S code means a built-in piston magnet is included for sensing position with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.