
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-40 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X45-40 is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop anywhere between 5 and 45 mm. Retract travel always stays at the full 45 mm.
Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so magnetic sensing is not supported.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 45 mm to set precise probe contact depth during product changeovers without swapping mechanical shims.
Adjust the push-out stroke on the fly to deflect packages of varying widths on a tight-footprint conveyor line.
Fine-tune the nozzle approach distance down to a 5 mm minimum to prevent collision with delicate glassware.
Choose this unit when machine setups demand frequent on-site stroke tuning without part swaps.
Confirm the 45 mm stroke, 40 mm window, and M5x0.8 port match your pneumatic layout. This base model has a female M3x0.5 rod-end thread and no magnet. Remember that a plain cylinder does not hold position upon air loss; integrate an external rod lock or pilot-operated check valve if load holding is required.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The external M5x0.8 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 45 mm maximum down to 5 mm. It does not alter the output force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.