
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-40B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X45-40B is a compact double-acting double-rod cylinder built for tight spaces, featuring a short riveted body that saves axial mounting depth where round-body alternatives will not fit. An external M5x0.8 adjuster screw lets you dial the extend stop directly on the machine, shortening the forward end from the 45 mm maximum down to 5 mm without swapping shims or parts.
This specific SKU includes a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End shock is handled solely by a fixed NBR bumper that decelerates the stroke, rather than an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the extend stop from 5 to 45 mm on trial assemblies to find the exact contact position for delicate 60 N pressing tasks.
Reposition the male M5 rod end in seconds during product line changeovers to push varying package sizes without changing hardware.
Set precise stroke limits for repetitive testing cycles, relying on the fixed NBR bumper to absorb the impact at the adjusted end point.
Choose this male-rod version if your tooling requires an M5x0.8 external thread, and confirm your setup needs on-site stroke tuning across the 5-45 mm window. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The adjuster screw changes the stop position but does not alter these force values.
Turning the R (M5x0.8) screw shortens the extend stroke by up to 40 mm, allowing the rod to stop anywhere between 5 mm and 45 mm. This SKU has no piston magnet so it cannot take a switch, and the screw is only a mechanical stop, not a lock; the cylinder will not hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.