
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-40S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X45-40S is a compact double-acting double-rod cylinder featuring an external M5x0.8 R-thread adjuster screw. This mechanism lets you dial the extend stop anywhere between 5 and 45 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
The unit includes a fixed NBR bumper at each end to decelerate the stroke end, and the built-in magnet (-S) supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for different carton sizes, using the fixed NBR bumper to absorb the end shock during high-speed 30-500 mm/s cycling.
Leverage the space-saving riveted body and built-in magnet for trial positioning in tight lab fixtures, triggering an electronic switch at the precise extend endpoint.
Choose this model if your application requires frequent on-machine stroke tuning within the 5-45 mm window.
Confirm your required bore, 45 mm maximum stroke, 40 mm adjustment window, and M5x0.8 port. The -S code indicates the piston magnet is present for sensing, and the rod end features a female M3x0.5 thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The included -S magnet works with AirTAC reed or electronic switches for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.