
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-50B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X45-50B is a compact double-acting double-rod cylinder featuring an external M5x0.8 R-thread adjuster screw that dials the extend stop from 0 to 45 mm directly on your equipment. This specific SKU includes a male M5x0.8 piston rod thread (designated by the B option) instead of the default female M3x0.5.
Its short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this particular configuration ships without a piston magnet, meaning it cannot host reed or electronic switches unless upgraded to an S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 45 mm |
| Adjustable range | 0 – 45 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speeds up format changeovers on packaging lines by letting operators twist the M5x0.8 adjuster to match new flap heights, avoiding part swaps and keeping the 5.1 kg vertical lift margin intact.
Suits laboratory test rigs where the male M5x0.8 rod threads into custom probes, allowing researchers to fine-tune the extend stop on the fly within the compact riveted body footprint.
When sizing this 16 mm bore actuator, evaluate both neighbouring options. Choose this model if your fixture requires frequent on-site stroke tuning or trial positioning without swapping shims.
Confirm your parameters: 16 mm bore, 45 mm maximum stroke, 50 mm adjustment window, M5x0.8 air port, male M5x0.8 rod thread, and no magnet. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and the R screw acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
Turning the external R (M5x0.8) screw shortens the extend stroke by up to 50 mm, giving a usable extend range of 0 to 45 mm without changing parts. This specific B-option SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.