verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke5 mm
  • Adjustable range0–5 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$27.67 $35.17Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB

The AirTAC SDAJ16X5-10SB is a compact double-acting double-rod cylinder built with a short riveted body to minimize axial mounting depth in tight spaces. It features an external M5x0.8 R adjuster screw that lets you dial the extend end-position down to a zero-to-five-millimetre usable window directly on the machine, avoiding any part changes or shims.

This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M5x0.8 piston rod thread.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke5 mm
Adjustable range0 – 5 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×5Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB Is Used

precision_manufacturing

Micro-Clamp Calibration

Dial in the male rod extension from 0 to 5 mm to set exact clamping depth on delicate electronic components without swapping actuators.

straighten

Thin-Wall Pushing

The compact riveted body fits into narrow testing fixtures, using the mechanical stop to prevent overtravel when deflecting thin materials.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB the Right Cylinder?

Confirm the 16mm bore, 5mm stroke, 10mm adjust window, and M5x0.8 air port match your pneumatic layout. Note that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed NBR bumper only decelerates near the stroke end, never acting as a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–5 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB FAQ

The M5x0.8 R screw shortens the extend stop by up to 10 mm, providing a usable 0-5 mm extend range while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing, and the screw acts purely as a mechanical stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X5-10SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.