
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X50-10 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A built-in M5x0.8 adjuster screw lets you dial the outward stroke anywhere between 40 and 50 mm, eliminating the need for shims or part swaps during machine commissioning.
This thin riveted-body design drastically reduces axial mounting depth, fitting easily into tight automation envelopes where larger profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without switching to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 40-50 mm extend stop on machining fixtures to accommodate varying part tolerances without fabricating new spacer blocks.
Adjust the mechanical stop on the fly for different box heights, ensuring the 6 mm rod folds flaps accurately at high cycling speeds.
When sizing this 16 mm bore actuator, evaluate your force requirements bidirectionally.
This model is ideal for operators needing precise trial positioning during frequent format changeovers. Keep in mind the fixed NBR bumper only decelerates the stroke end; it does not hold the load if air pressure drops or the valve is centered. For secure load holding without live pressure, you must integrate an external rod lock or pilot-operated check valve. Configuration details: 16 mm bore, 50 mm max stroke, 10 mm adjust window, M5x0.8 port, female M3x0.5 rod thread, and no magnet.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M5x0.8 R screw mechanically shortens the extend stroke by up to 10 mm, allowing you to set the outward position anywhere between 40 and 50 mm. This specific SKU has no piston magnet, so it cannot accept AirTAC reed or electronic switches; you must select the -S variant for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.