
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The SDAJ16X50-20B is a compact double-acting cylinder featuring a male-thread M5x0.8 piston rod and an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 30 to 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. The short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit.
A fixed NBR bumper decelerates the stroke end and is not an adjustable air cushion. This SKU lacks a piston magnet, so it cannot host reed or electronic switches without the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 50 mm to find the exact contact point for a 5.1 kg vertical lift setup without machining new spacers.
Fine-tune the push stroke on the fly for product changeovers, maintaining a safe 60 N working load against varying package widths.
Use the male M5x0.8 rod end to mount probes and adjust the extension depth precisely in compact, space-constrained test benches.
It is ideal for operators needing on-site stroke tuning between 30 and 50 mm.
Confirm the 16 mm bore, 50 mm maximum stroke, 20 mm adjustment window, and M5x0.8 port. This SKU includes the -B male M5x0.8 rod thread and no magnet. Note that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The M5x0.8 R screw mechanically shortens the extend stop from the 50 mm maximum down to 30 mm. It does not alter force or lock mid-stroke; the fixed NBR bumper only decelerates the end of travel. This SKU has no magnet, so sensing requires the -S variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.