verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke50 mm
  • Adjustable range20–50 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$39.04 $46.54Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S

The AirTAC SDAJ16X50-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M5x0.8) screw lets you dial the extend position anywhere between 20 and 50 mm directly on the machine, eliminating the need for shims or part swaps. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit.

The integrated -S magnet enables position sensing with AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke ends.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke50 mm
Adjustable range20 – 50 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×50Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S Is Used

precision_manufacturing

Trial Positioning

Dial the extend stop from 20 to 50 mm during prototype tooling to find the exact contact point for a 60 N pressing task.

conveyor_belt

Changeover Diverter

Adjust the stroke on-site to deflect varying package sizes on a line without swapping out the entire actuator body.

vertical_align_center

Vertical Lift Stop

Set a precise mechanical upper limit for a 5.1 kg vertical lift, relying on the fixed NBR bumper to absorb end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S the Right Cylinder?

Choose the SDAJ16X50-30S if your fixture requires frequent on-machine stroke tuning between 20 and 50 mm.

Confirm the bore, 50 mm maximum stroke, 30 mm window, and M5x0.8 air port. The -S code specifies the built-in magnet for reed or electronic switches, and the female M3x0.5 rod-end thread suits standard compact-cylinder accessories. Note that a plain cylinder does not hold its load on air loss or valve centring; for secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S FAQ

The M5x0.8 R screw mechanically shortens the extend stroke by up to 30 mm, yielding a usable 20 to 50 mm range without altering force. The -S option adds a piston magnet for AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X50-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.