
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X50-40 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front M5x0.8 adjuster screw lets you dial the outward stroke down by up to 40 mm directly at the machine, yielding a usable extend range of 10 to 50 mm without swapping shims or parts.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing; adding an -S code variant enables switch integration.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 50 mm |
| Adjustable range | 10 – 50 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
The compact riveted body fits between tight conveyor lanes, deflecting lightweight packages at varying angles set by the external screw.
Iteratively tune the outward reach during R&D setup to probe test points accurately, avoiding overtravel damage to sensitive electronics.
Dropping down to the 12 mm bore cuts that thrust to 56.5 N, while stepping up to the 20 mm bore increases it to 157.1 N. It is ideal for operators who require frequent on-machine stroke tuning to accommodate different part heights or trial positioning.
Confirm your parameters before ordering: 16 mm bore, 50 mm maximum stroke, 40 mm adjust window, M5x0.8 port, female M3x0.5 rod-end thread, and no magnet. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston drifts. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw shortens the extend end-position by up to 40 mm, allowing you to set the outward stroke anywhere between 10 and 50 mm. The retract stroke remains full, and the screw acts purely as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.