verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke50 mm
  • Adjustable range10–50 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.53 $40.03Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B

The AirTAC SDAJ16X50-40B is a double-acting compact cylinder featuring a male-thread M5x0.8 piston rod and an external M5x0.8 adjuster screw. Turning this R screw lets you dial the extend end-position anywhere between 10 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

The short riveted body saves valuable axial mounting depth where a longer profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; adding the -S option is required for position sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke50 mm
Adjustable range10 – 50 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×50Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B Is Used

conveyor_belt

Changeover Diverter Arms

Quickly retune the extend length for different product widths on a packaging line without changing the cylinder body or adding shims.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B the Right Cylinder?

When sizing this 16 mm bore actuator, evaluate your force requirements against its neighbours. Choose this specific model if your setup-heavy line requires frequent on-machine stroke tuning across its 10-50 mm window.

Confirm the bore, 50 mm maximum stroke, 40 mm adjust window, and M5x0.8 air port suit your pneumatics layout. The -B suffix indicates a male M5x0.8 rod thread, and no -S suffix means no magnet is present for sensing. Remember that a plain cylinder does not hold its load on air loss or valve centring; the fixed bumper only decelerates near the stroke end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B FAQ

The operating speed range is 30-500 mm/s.

The external M5x0.8 screw acts as a mechanical stop that shortens the extend stroke from the 50 mm maximum down to 10 mm. It does not alter the force and is not a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost, requiring an external rod lock for holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-40B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X50-40B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.