
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-50B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X50-50B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 0 and 50 mm directly on the machine.
This variant uses a male M5x0.8 piston rod thread and lacks a piston magnet. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. A fixed NBR bumper at each end decelerates the stroke end; it is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 50 mm |
| Adjustable range | 0 – 50 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M5x0.8 adjuster to reposition the male M5 rod end for new part families without swapping cylinders or adding shims.
Find the exact trial position for a 5.1 kg vertical lift on the fly, relying on the fixed NBR bumper to absorb the stop impact.
Choose this model for setups requiring frequent on-site stroke tuning.
Confirm the 50 mm maximum stroke, 50 mm adjust window, and M5x0.8 air port. The -B code specifies the male M5x0.8 rod end. Note that a plain cylinder does not hold its load on air loss or valve centering—the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw shortens the extend stop by up to 50 mm, giving a usable range of 0 to 50 mm. It is a mechanical stop, not a mid-stroke lock. This SKU has no magnet; the -S variant adds one for reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.