
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-10 is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward travel from 45 to 55 mm directly on your equipment.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 45 and 55 mm to touch off delicate electronic probes accurately without re-machining hard stops.
Adjust the outward reach on the fly during product family changeovers to accommodate different fixture thicknesses.
Choose this 45-55 mm adjustable version if your fixture requires trial positioning during setup or frequent changeovers.
Confirm the 55 mm maximum stroke, 10 mm window, M5x0.8 port, and female M3x0.5 rod-end thread suit your mounting. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers—the piston drifts. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the M5x0.8 adjuster screw shortens the extend end position down to 45 mm from the 55 mm maximum. The screw is a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.