
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-10B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 45 to 55 mm directly on your machine. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders simply will not fit.
This specific SKU uses a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches. A fixed NBR bumper at each end decelerates the stroke end; it is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop precisely between 45 and 55 mm to set exact contact pressure on delicate testing probes without machining replacement spacers.
Adjust the male M5x0.8 rod end position on the fly when switching between product families on a high-mix assembly line, saving valuable retooling minutes.
Choose this model when your fixture requires on-site stroke tuning to hit an exact datum without machining spacers.
Confirm your parameters: 16 mm bore, 55 mm maximum stroke with a 10 mm adjust window, M5x0.8 air port, male M5x0.8 rod thread, and no magnet. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the bumper only decelerates near the stroke end. For a securely held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a 0.15-1.0 MPa pressure range.
Turning the external M5x0.8 R screw shortens the extend stop by up to 10 mm, giving a usable extend range of 45-55 mm. The screw acts only as a mechanical stop and does not alter the force. It is not a mid-stroke lock; the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.