
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M5x0.8) adjuster screw, you can dial the forward stroke down by up to 20 mm directly on the machine, yielding a usable extend range of 35 to 55 mm without swapping shims or parts.
This variant features a male M5x0.8 piston rod thread (default is female M3x0.5) and carries no piston magnet, meaning it cannot host reed or electronic switches. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a load lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 35-55 mm extend stop during prototype runs. The R screw lets you find the optimal push point for a 60 N load without machining new spacers.
Switch product formats on a packaging line by readjusting the male M5 rod extension.
Fit the short riveted body into tight ejector stations. The fixed NBR bumper absorbs the end shock as the rod cycles at 30-500 mm/s.
Choose this specific SKU when your setup requires on-site stroke tuning across a 35-55 mm window, a male M5x0.8 rod end, and an M5x0.8 air port. Note that this base unit lacks a magnet for sensing. Crucially, a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
It operates at 30-500 mm/s, accepts air at 0.15-1.0 MPa, and functions in -20 to +70 C temperatures.
Turning the external R (M5x0.8) screw mechanically shortens the extend stop, giving a usable forward range of 35-55 mm. This specific SKU has no piston magnet and cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.