verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke55 mm
  • Adjustable range35–55 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$41.63 $49.13Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S

The AirTAC SDAJ16X55-20S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 35 and 55 mm directly on the machine, avoiding part swaps during setup.

Its short riveted body drastically cuts axial mounting depth where round-body or profile units will not fit. The bore uses an M5x0.8 port and a 6 mm rod. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion. Equipped with a built-in piston magnet, this unit supports AirTAC reed or electronic switches for position confirmation.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke55 mm
Adjustable range35 – 55 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×55Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S Is Used

precision_manufacturing

Trial Positioning

Dial the extend stop from 35 to 55 mm to find the exact contact point for a 5.1 kg vertical lift without machining new spacers.

science

Lab Dispensing

Set precise nozzle extension into a well, relying on the fixed NBR bumper to decelerate the 6 mm rod gently at the adjusted end point.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S the Right Cylinder?

When sizing this 16 mm bore, evaluate both neighbours. Choose this specific unit if your fixture requires on-site stroke tuning across a 20 mm window.

Confirm the 55 mm maximum stroke, 20 mm adjustability, M5x0.8 port, and the female rod-end thread. The included -S magnet enables solid-state or reed sensing. Remember that a plain cylinder does not hold a load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

The M5x0.8 adjuster screw mechanically shortens the extend stop by up to 20 mm, giving a usable range of 35-55 mm. It does not alter force or lock mid-stroke. The built-in -S magnet works with AirTAC reed or electronic switches for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X55-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.