verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke100 mm
  • Adjustable range70–100 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$57.91 $65.41Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S

The AirTAC SDAJ20X100-30S is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M6x1.0 adjuster screw lets you dial the outward travel anywhere between 70 and 100 mm without swapping parts.

Its short riveted body minimizes axial footprint where space is tight. The unit relies on a fixed NBR bumper to absorb end-of-stroke shock rather than an adjustable air cushion. Equipped with a piston magnet, this variant supports AirTAC reed or electronic switches for precise end-position confirmation.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke100 mm
Adjustable range70 – 100 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×100Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S Is Used

precision_manufacturing

Prototype Dialing

Ideal for prototype tooling where the exact extend point must be dialed in physically between 70 and 100 mm during initial commissioning.

conveyor_belt

Sorter Deflector

Provides adjustable stroke for a conveyor sorting gate that needs its push distance tweaked as product sizes change on the line.

packaging

Carton Flap Folder

Handles packaging changeovers by allowing operators to shorten the extend stop to 70 mm for smaller cartons without changing hardware.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S the Right Cylinder?

When sizing, compare this 20 mm bore offering against its neighbors. Dropping down to the 16 mm version cuts the 0.5 MPa push to 100.5 N, while stepping up to a 25 mm bore increases it significantly to 245.4 N.

Choose this configuration if your assembly requires frequent on-machine stroke tuning between 70 and 100 mm. It features an 8 mm rod, an M5x0.8 port, and female M4x0.7 rod threads. Remember that a plain actuator drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the mechanical stop is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 70–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The M6x1.0 R screw shortens the extend stop by up to 30 mm, giving a usable range of 70 to 100 mm. The included -S magnet works with AirTAC reed or electronic switches to confirm position; the screw itself is a mechanical stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X100-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.