
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X100-30SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you can dial the forward stroke down by up to 30 mm directly on the machine, yielding a usable extend range of 70 to 100 mm without swapping shims or parts.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, alongside a male-thread piston rod (-B, M6x1.0) for secure tool mounting. The short riveted body saves valuable axial depth where larger profile cylinders cannot fit. End-of-stroke shock is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 70-100 mm extend stop via the M6x1.0 screw to find the exact contact point for prototype parts before locking down the final fixture.
Quickly retune the forward stroke by up to 30 mm on the fly when switching between product sizes on a packaging line, avoiding part changes.
When sizing this unit, evaluate both neighboring bores against your real load limits. Choose this specific model if your fixture requires on-site stroke tuning to perfect end positions during setup or changeover.
Confirm the 20 mm bore, 100 mm maximum stroke, 30 mm adjust window, and M5x0.8 air port for your plumbing. This configuration ships with the -S magnet for position sensing and the -B male M6x1.0 rod end. Remember that a plain compact cylinder does not hold a load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range and a -20 to +70 C temperature environment.
The external R (M6x1.0) screw mechanically shortens the extend end position by up to 30 mm, allowing you to set the forward stroke anywhere between 70 and 100 mm. The included -S magnet enables position feedback using AirTAC reed or electronic solid-state switches mounted in the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.