
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-40B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 60 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X100-40B is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M6x1.0) adjuster screw lets you dial the extend position anywhere between 60 and 100 mm directly on the machine, eliminating the need for shims or part swaps. Retract remains full length, and the mechanical stop sets position without altering the pneumatic area.
The short riveted body minimizes axial mounting depth where round-body or profile units will not fit. This SKU includes a male-thread M6x1.0 piston rod and lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 100 mm |
| Adjustable range | 60 – 100 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Raise an 8 kg fixture to a variable height up to 100 mm, relying on the mechanical stop rather than precise pneumatic pressure for the endpoint.
Stepping down to SDAJ16 yields 100.5 N, while stepping up to SDAJ25 provides 245.4 N.
Choose this unit when your fixture requires on-site stroke tuning during setup or changeover. Confirm the 20 mm bore, 100 mm maximum stroke, 40 mm adjust window, M5x0.8 port, and male M6x1.0 rod thread. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed NBR bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The R (M6x1.0) screw shortens the extend stop by up to 40 mm, yielding a 60-100 mm usable range. It is a mechanical stop, not a mid-stroke lock. Without live air pressure the piston drifts, so use an external rod lock for load holding. This SKU lacks a magnet for switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.