verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 100 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke100 mm
  • Adjustable range50–100 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$50.00 $57.50Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50

The AirTAC SDAJ20X100-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front M6x1.0 adjuster screw lets you dial the extend position anywhere between 50 and 100 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 100 mm stroke.

The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke100 mm
Adjustable range50 – 100 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×100Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50 Is Used

straighten

Variable Length Gauging

Dial the M6x1.0 stop to position a part probe between 50 and 100 mm, accommodating multiple product lengths on a single test rig without machining new spacers.

precision_manufacturing

Trial Forming Stops

Set the mechanical end-stop precisely during short-run stamping setups to find the correct 8 kg vertical forming depth before locking the tooling down.

sync_alt

Changeover Pushers

Quickly reconfigure a transfer line pusher that needs to move packages varying distances, using the full 100 mm retract to clear the workspace safely.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50 the Right Cylinder?

When sizing this 20 mm bore actuator, evaluate your force requirements bidirectionally.

Choose this model if your fixture requires frequent on-site stroke tuning between 50 and 100 mm. It features an M5x0.8 port, a female M4x0.7 rod-end thread, and no piston magnet. Note that a plain cylinder does not hold position on air loss; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50 FAQ

It operates at 30-500 mm/s, accepts 0.15-1.0 MPa air pressure, and functions in -20 to +70 C temperatures.

This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must specify the -S option for sensing capabilities.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X100-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.