
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X100-50B is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the extend position anywhere between 50 and 100 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 100 mm stroke.
The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male M6x1.0 piston rod thread and lacks a piston magnet, meaning it cannot support sensing switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 100 mm |
| Adjustable range | 50 – 100 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the M6x1.0 adjuster to fine-tune the extend stop between 50 and 100 mm during short-run prototype builds, finding the exact contact position without machining new spacers.
Set precise upper travel limits for an 8 kg vertical lift, utilizing the male M6x1.0 rod end while ensuring an external check valve holds the load if air fails.
When sizing this unit, evaluate both neighboring bores.
This model is built for setups requiring frequent on-site stroke tuning without disassembly. It features a 50 mm adjustment window, an M5x0.8 port, and a male M6x1.0 rod end. Note that a plain cylinder will not hold a load if air pressure drops or the valve centers; the fixed NBR bumper only decelerates the stroke end and acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The air port is M5x0.8.
This specific SKU lacks a piston magnet, so it cannot support sensing; you must specify the -S option for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.