verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke110 mm
  • Adjustable range100–110 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$62.31 $69.81Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S

The AirTAC SDAJ20X110-10S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 100 to 110 mm directly on your equipment.

This variant includes a built-in piston magnet for AirTAC reed or electronic switches and uses an 8 mm rod with an M5x0.8 port. Its 110 mm stroke is a non-standard made-to-order length exceeding the 100 mm standard maximum for this 20 mm bore. The short riveted body saves axial mounting depth, and end shock is managed solely by a fixed NBR bumper.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke110 mm
Adjustable range100 – 110 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×110Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the extend stop from 100 to 110 mm during initial fixture commissioning to find the exact contact point for delicate 8 kg test assemblies.

conveyor_belt

Changeover Diverter

Fine-tune the stroke end by up to 10 mm on the fly when switching a packaging line between different product widths without changing hardware.

engineering

Sensor Calibration Arm

Leverage the built-in magnet with an electronic switch to verify position, while tweaking the mechanical stop to perfect the sensing distance.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S the Right Cylinder?

Choose this specific model if your fixture requires exact on-site extend tuning within the 100-110 mm window.

Confirm the 20 mm bore, 110 mm stroke, 10 mm adjustment window, M5x0.8 port, female M4x0.7 rod thread, and the included -S magnet. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed NBR bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 100–110 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S FAQ

Turning the external M6x1.0 screw shortens the extend end-position anywhere between 100 and 110 mm without shims. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X110-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X110-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.