verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 130 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke130 mm
  • Adjustable range30–130 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$73.01 $80.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB

The AirTAC SDAJ20X130-100SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in piston magnet (-S) supports AirTAC reed or electronic switches, while the male M6x1.0 rod thread (-B) handles direct mounting. Because the 130 mm stroke exceeds the 100 mm standard for this 20 mm bore, this unit is a non-standard, made-to-order configuration.

Turning the R (M6x1.0) adjuster screw lets you dial the extend end-position anywhere between 30 and 130 mm without changing parts. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke130 mm
Adjustable range30 – 130 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×130Maximum stroke length in mm.
-100Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB Is Used

straighten

Trial Positioning Jigs

Dial the extend stop from 30 to 130 mm to find the exact 94 N safe working contact point during prototype assembly.

sync_alt

Changeover-Heavy Lines

Rotate the M6x1.0 adjuster screw to reconfigure the 8 kg vertical lift depth for different product formats without swapping cylinders.

precision_manufacturing

Compact Depth Gauging

Fit the short riveted body into tight machinery to actuate a gauging check, relying on the fixed NBR bumper to absorb end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB the Right Cylinder?

Choose this specific model when you need extensive on-site stroke tuning across a wide 100 mm window.

Confirm the 20 mm bore, 130 mm stroke, 100 mm adjust window, and M5x0.8 port. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The R (M6x1.0) screw shortens the extend stroke by up to 100 mm, yielding a usable 30 to 130 mm range. The -S option adds a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-100SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X130-100SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.