verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke130 mm
  • Adjustable range100–130 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$64.43 $71.93Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B

The AirTAC SDAJ20X130-30B is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the forward stroke down by up to 30 mm directly at the machine, yielding a usable extension range of 100 to 130 mm without swapping shims or parts.

This unit uses a short riveted body to minimize axial mounting depth where round-body or profile alternatives will not fit. It includes a male M6x1.0 piston rod thread, a fixed NBR bumper at each end to decelerate the stroke, and operates at 30-500 mm/s. Note that the 130 mm stroke exceeds the standard 100 mm maximum for a 20 mm bore, making this a made-to-order configuration.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke130 mm
Adjustable range100 – 130 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×130Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B Is Used

precision_manufacturing

Tooling Changeover

Dial the M6x1.0 stop screw across the 100-130 mm window to set precise extend endpoints for varying jig heights without machining new spacers.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B the Right Cylinder?

If your application requires less force, the SDAJ16 bore provides 100.5 N at 0.5 MPa; for heavier demands, the SDAJ25 delivers 245.4 N at 0.5 MPa. This specific SKU includes the -B option for a male-threaded rod and lacks the -S magnet, meaning it cannot accept reed or electronic switches.

Choose this model when you need on-site stroke tuning during frequent changeovers. Keep in mind that a plain cylinder does not hold its load when air is lost or the valve is centered—the piston drifts, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 100–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw shortens the extend stop by up to 30 mm, giving a usable forward range of 100 to 130 mm. The screw acts purely as a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; you need an external rod lock or pilot-operated check valve for that.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X130-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.