
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X130-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 100 and 130 mm directly on the machine, eliminating the need for shims or part swaps.
Its short riveted body drastically saves axial mounting depth where round-body or profile cylinders will not fit. This specific 130 mm stroke exceeds the 100 mm standard maximum for a 20 mm bore, making it a non-standard, made-to-order item. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and relies on a fixed NBR bumper to decelerate the stroke end.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for trial positioning on prototype jigs where the exact extend point between 100 and 130 mm must be dialed in physically without recompiling motion control parameters.
Speeds up format changeovers on packaging lines by allowing operators to turn the M6x1.0 screw to accommodate different carton depths rather than swapping entire actuators.
Useful for vertical lifting tasks under 8 kg where the fixed NBR bumper absorbs the end shock and the external stop prevents over-travel beyond the set 100-130 mm range.
When sizing this 20 mm bore actuator, evaluate your force needs bidirectionally.
Choose this specific configuration if your fixture requires on-site stroke tuning within the 100-130 mm window. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, 130 mm max stroke, 30 mm window, M5x0.8 port, female M4x0.7 rod thread, and the -S magnet option before ordering.
Quick checklist
The M6x1.0 R screw shortens the extend stop by up to 30 mm, yielding a usable outward range of 100-130 mm; retract remains full stroke. The built-in -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.