
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X15-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X15-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A recessed M6x1.0 adjustment screw lets you dial the outward stroke down from the 15 mm maximum right to a zero position directly at the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile or round-body actuators will not fit. End-of-travel energy is managed solely by a fixed NBR bumper, which decelerates the piston near the end of the stroke rather than acting as an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X15-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 15 mm |
| Adjustable range | 0 – 15 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Swap product sizes on a packaging line by turning the M6x1.0 adjuster screw on the fly, completely avoiding teardown or spacer replacement.
Find the exact ejection point for small electronic modules by testing different extend lengths within the 0-15 mm range before locking the stop.
When sizing this 20 mm bore, evaluate your force requirements carefully. Choose this model if your fixture demands on-site stroke tuning within a tight space.
Confirm your parameters before ordering: a 20 mm bore, 15 mm maximum stroke, and a 20 mm adjustment window. The air port is M5x0.8, and the rod-end thread is female M4x0.7. Because this configuration omits the -S magnet code, position sensing is unavailable. Note that the mechanical stop and fixed bumper do not secure the load; if you need to hold a vertical load without live air pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 219.9 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
The external M6x1.0 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 15 mm maximum down to 0 mm. It sets the end position without altering the output force, and the retract stroke remains full length.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.