
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X20-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X20-20 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M6x1.0 adjuster screw lets you dial the extend position from 0 to 20 mm directly on the machine, saving axial mounting depth where larger profile bodies cannot fit. Retract remains full length.
End shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X20-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-20 mm extend stop during initial fixture setup, allowing precise clamp placement without machining custom spacers.
Fit the short riveted body into tight machine cells to act as a hard mechanical stop, utilizing the fixed NBR bumper to absorb end shock.
Stepping down to the SDAJ16 yields 100.5 N, while moving up to the SDAJ25 provides 245.4 N.
Choose this adjustable model if your fixture requires frequent trial positioning or changeovers. Confirm your port is M5x0.8 and the rod end is female M4x0.7. Remember that a plain cylinder drifts on air loss or valve centring; the fixed bumper only decelerates near the end and is not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
Turning the M6x1.0 R screw shortens the extend stroke by up to 20 mm, giving a usable extend range of 0 to 20 mm. The screw creates a mechanical stop and does not alter the force, nor does it lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.