
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X25-10B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a male M6x1.0 piston rod thread instead of the standard female. Its short riveted body saves mounting depth where round-body or profile units fail to fit. A fixed NBR bumper handles end-of-stroke deceleration, as this unit lacks an adjustable air cushion.
You can dial the extend stop on the machine between 15 and 25 mm using the M6x1.0 R adjuster screw, eliminating shims during changeovers. This SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 25 mm via the R screw to set new tooling positions rapidly, avoiding part changes during production line setups.
Test and fine-tune sensor target locations on the fly using the M6x1.0 adjuster, perfect for prototyping before locking down a final mechanical length.
If your application requires less force, the SDAJ16 provides 100.5 N at 0.5 MPa; stepping up to the SDAJ25 offers 245.4 N. Confirm your requirements for the 25 mm maximum stroke, 10 mm adjustment window, M5x0.8 port, and male M6 rod.
Operators needing on-site extend tuning without part swaps will benefit from the external screw. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the bumper only decelerates near the end and the screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stroke by up to 10 mm, allowing usable positions between 15 and 25 mm without altering force. This specific SKU has no piston magnet, so it cannot accept reed or electronic switches; you need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.